Frequency converter 5.5 kW BM2200-5R5G

SKU: 00099397

412.37 EUR

Specification

Type of equipment	MIXXMANN S6, MIXXMANN S8, MIXXMANN S5
Brand	MIXXMANN
View	Frequency converter
Power	5.5 kW
High-voltage	230V

Description

Frequency Converter

· Control Mode:

Sensorless Vector Control of Flow (SFVC). Voltage/Frequency Control (V/F)

· Maximum Frequency:

Vector Control: 0-320 Hz
V/F Control: 0-3200 Hz

· Operational Frequency:

1 kHz - 16 kHz. The operational frequency can be automatically adjusted depending on the load function.

· Input Frequency Resolution:

Digital setting: 0.01 Hz

Analog setting: maximum frequency x 0.025%

· Starting Torque:

Type G: 0.5 Hz/150% (SFVC);
Type P: 0.5 Hz/100%

· Speed Range:

1:100 (SFVC)

· Speed Stability Accuracy:

±0.5% (SFVC)

· Overload Capacity:

Type G: 60 s for 150% rated current, 3 s for 180% rated current.
Type P: 60 s for 120% rated current, 3 s for 150% rated current.

· Torque Boost:

Fixed boost/Tuneable boost 0.1%–30.0%

· V/F Curve:

Straight V/F curve
Multi-point V/F curve

V/F curve power N (1.2 power, 1.4 power, 1.6 power, 1.8 power, rectangular)

· V/F Separation:

Two types: full separation; half-separation

· Ramp/Acceleration Mode:

Straight ramp

S-curve ramp/acceleration

Four groups of acceleration/deceleration time ranging from 0.0–6500.0 s

· DC Braking:

DC braking frequency: from 0.00 Hz to maximum frequency. Braking time: 0.0–100.0 s

Braking current value: 0.0%–100.0%

· JOG Control:

JOG frequency range: 0.00–50.00 Hz

JOG acceleration/deceleration time: 0.0–6500.0 s

· Multiple Built-in Pre-set Speeds:

Realizes up to 16 speeds using a simple PLC function or through input terminal states (X)

· Built-in PID Controller:

Easily implements a closed-loop control system, driven by the process.

· Automatic Voltage Regulation (AVR):
Can automatically maintain constant output voltage as the supply voltage changes.

· Overvoltage/Overcurrent Stop Control:

Current and voltage are automatically limited during operation to avoid frequent trips due to
overvoltage/overcurrent.

· Torque Limiting and Control:
It can automatically limit torque and prevent frequent trips due to current overload during operation.

· Instant Stop Does Not Halt:

Feedback energy from the load compensates for voltage drop so that the AC drive can continue to operate for a short time.

· Fast Current Limiting:

Helps avoid frequent overcurrent overloads in the AC drive.

· High Performance:

Control of the asynchronous motor is implemented using high-performance current vector control technology.

· Time Control:

Time range: 0.0–6500.0 minutes

· Communication Methods: RS485

· Control Work Channel:

Provided by panel, control terminals, serial communication port, can switch in many ways

· Frequency Source:

10 types of frequency sources provided: Digital analog voltage signal, analog current, pulse, serial port. Can switch in many ways

· Auxiliary Frequency Source:

10 types of frequency sources provided: Digital analog voltage signal, analog current, pulse, serial port. Can switch in many ways.

· Input Terminals:

6 digital input terminals, one of which supports high-speed pulse input up to 100 kHz. (optional) 2 analog input terminals, one of which supports only voltage input 0-10 V, and the other supports voltage input 0-10 V and current input 4-20 mA.

· Output Terminals:

1 digital output terminal, 1 relay output terminal, 1 analog output terminal.

Terminal: supports current output 0–20 mA or voltage 0–10 V output

· Control Panel Operation:

· LED Display:

Displays parameters.

· Key Lock and Function Selection:

Keys can be partially or fully locked, and the function range of certain keys can be defined to prevent incorrect operation.

· Protection Mode:

Motor short-circuit detection during startup, output phase loss protection, overcurrent protection, overvoltage protection, undervoltage protection, overheating protection, and overload protection.

· Installation Location:

Indoors, avoid direct sunlight, dust, aggressive gases, flammable gases, oil mist, steam, droplets, or salts.

· Altitude:

Less than 1000 m (lower grades for use above 1000 m)

· Ambient Temperature:

-10℃ ～40℃ (lower grades for use in the range of 40℃ to 50℃)

· Humidity:

Less than 95% relative humidity, no condensation

· Vibration:

Less than 5.9 m/s² (0.6 g)

· Storage Temperature:

-20℃ ～60℃