Frequency converter 3.7 kW BM2200-3R7G

SKU: 00099396

291.61 EUR

Specification

Type of equipment	MIXXMANN S3+, MIXXMANN S3
Brand	MIXXMANN
View	Frequency converter
Power	3.7 kW
High-voltage	230V

Description

Frequency Converter

· Control Mode:

Sensorless Vector Control (SFVC). Voltage/Frequency Control (V/F)

· Maximum Frequency:

Vector Control: 0-320 Hz
V/F Control: 0-3200 Hz

· Operating Frequency:

1 kHz-16 kHz. The operating frequency can be automatically adjusted depending on the load function.

· Input Frequency Resolution:

Digital setting: 0.01 Hz

Analog setting: maximum frequency x 0.025%

· Starting Torque:

Type G: 0.5 Hz/150% (SFVC);
Type P: 0.5 Hz/100%

· Speed Range:

1:100 (SFVC)

· Speed Stability Accuracy:

±0.5% (SFVC)

· Overload Capacity:

Type G: 60 s for 150% rated current, 3 s for 180% rated current.
Type P: 60 s for 120% rated current, 3 s for 150% rated current

· Torque Boost:

Fixed boost/Tuned boost 0.1%–30.0%

· V/F Curve:

Linear V/F Curve
Multi-point V/F Curve

Power V/F curve N (1.2 power, 1.4 power, 1.6 power, 1.8 power, rectangular)

· V/F Segmentation:

Two types: full segmentation; half-segment

Linear ramp

S-curve acceleration/deceleration

Four groups of acceleration/deceleration time with a range of 0.0–6500.0 s

· DC Braking:

DC braking frequency: from 0.00 Hz to maximum frequency. Braking time: 0.0-100.0 s

Braking current value: 0.0%–100.0%

· JOG Control:

JOG frequency range: 0.00–50.00 Hz

JOG acceleration/deceleration time: 0.0–6500.0 s

· Multiple Built-in Pre-set Speeds:

Up to 16 speeds can be realized via simple PLC function or input terminal states (X)

· Built-in PID Controller:

Easily implements a closed-loop control system driven by the process.

· Automatic Voltage Regulation (AVR):
Can automatically maintain a constant output voltage while the supply voltage varies.

· Overvoltage/Overcurrent Stop Control:

Current and voltage are automatically limited during operation to avoid frequent tripping due to
overvoltage/overcurrent.

· Torque Limiting and Control:
It can automatically limit torque and prevent frequent tripping due to overcurrent during operation.

· Instant Stop Does Not Halt:

The feedback energy from the load compensates for voltage drop, allowing the AC drive to continue operating for a short time.

· Fast Current Limiting:

This helps avoid frequent overloads of the AC drive.

· High Performance:

Asynchronous motor control is achieved using high-performance current vector control technology.

· Time Control:

Time range: 0.0–6500.0 minutes

·        RS485

·

Issued by panel, control terminals, Serial communication port, can be switched in various ways

·

10 types of frequency sources issued: Digital analog voltage signal, analog current, pulse, serial port. Can be switched in various ways

· Auxiliary Frequency Source:

10 types of frequency sources issued: Digital analog voltage signal, analog current, pulse, serial port. Can be switched in various ways.

· Input Terminals:

6 digital input terminals, one of which supports high-speed pulse input up to 100 kHz. (optional) 2 analog input terminals, one supporting only voltage input 0-10 V, and the other supporting voltage input 0-10 V and current input 4-20 mA.

· Output Terminals:

1 digital output terminal 1 relay output terminal 1 analog output terminal.

Terminal: supports current output 0–20 mA or voltage 0–10 V output

· Control Panel Management on

· LED Display:

Displays parameters.

·

Can partially or fully lock keys and define the function range of certain keys to prevent improper operation.

· Protection Mode:

Motor short-circuit detection during startup, loss of output phase protection, current overload protection, overvoltage protection, undervoltage protection, overheating protection, and overload protection.

·

Indoors, avoid direct sunlight, dust, aggressive gas, flammable gas, oil mist, vapor, drops, or salt.

·

Less than 1000 m (lower degrees for use above 1000 m)

· Ambient Temperature:

-10 40 (lower degrees for use in the range of 40 to 50)

· Humidity:

Less than 95% relative humidity, no condensation

· Vibration:

Less than 5.9 m/s² (0.6 g)

·

-20 60

Frequency converter 3.7 kW BM2200-3R7G

Related Products

Related Products