Multi-voltage plastering station MIXXMANN S8 with the possibility of working in 230V or 400V modes. Intended for work with machine-applied dry construction mixtures, such as: gypsum plaster, lime-gypsum plaster, cement plaster, lime plaster, lime-cement plaster, mortar for (stone) masonry, insulating plaster, mortar for mortar.
Its feature is an improved reinforced case.
Technical characteristics:
Width: 750 mm
Height: 1550 mm
Length: 1100 mm
Dry mix filling depth: 930 mm
Capacity of receiving hopper: 140 l
Weight of plastering machine without complete set: 256.5 kg
Weight of plastering machine with complete set: 262.5 kg
Power:
Pump motor - 4 kW/5.5 kW
Star wheel motor - 0.55 kW
water pump - 0.5 kW
compressor - 0.52 kW
Electric current consumption:
Screw pump motor 19.2/11.1 A at 230/400 V
Star wheel motor 2.4/1.4 A at 230/400 V
Electrical protection:
protective circuit breaker 3 x 25 A
Nominal voltage: 230/400 V
Control voltage: 42 V
Water fittings with flow meter: 100-1500 l/h
Number of revolutions:
pump drive approx. 120-400 rpm
Star wheel motor approx. 28 rpm
Productivity: 8-40 l/min, (depending on the composition of the solution and the type of screw pair)
Delivery distance:
25 m (with a hose diameter of up to 25 mm)
40 m (with a hose diameter of up to 35 mm)
Maximum injection pressure of the solution: 30 bar (depending on the composition of the solution and the type of screw pair)
Noise level: 85±1Db
Features:
- Built-in water pump
- Built-in additional filter for fine water purification
- Reinforced body
Complete:
- Hose 3/8" air 10 m (with GEKA connections) transparent - 1 pc.
- Hose 25 mm 10 m (sleeve) with connections - 1 pc
- Geka gasket – 3 pcs
- Gasket 25 mm connection MT-25 – 2 pcs
- Washing ball 30 for a 25 mm hose - 2 pcs
- Connection GEKA hose 3/4" - 2 pcs.
- Cleaner - 1 pc.
- Cleaner shaft - 1 pc
- Spiral mixing - 1 pc
- Gun for mortar 0.5 m - 1 pc
- Shompol for cleaning the gun - 1 pc
- Special key for disassembling the water reducer - 1 pc
- Template for a gun nozzle - 1 pc
- Key for the control cabinet - 1 pc
- Wrench for screw pair 30 cm
- Wrench 24-30 mm
- Transition of 220V/3x16 to 380V/5x32
- Screw pair SD 6-3 Slimline - 1 pc.
- Instructions for plaster station MIXXMANN S8