MIXXMANN S3 230V - a compact plastering machine controlled by one operator, 230V power supply, applicable for the preparation and application of plaster compositions, paste-like putties, leveling compositions, water-dispersion paints and other materials with a maximum fraction of up to 3 mm.
Technical characteristics:
Width: 640 mm
Height: 1480 mm
Length: 900 mm
Dry mix filling height: 930 mm
Receiving hopper volume: 70 l (installation of an additional hopper +70 l is possible)
Weight of plastering machine without equipment: 135 kg
Weight of plastering machine with complete equipment: 135 kg
Power:
screw pair drive - 2.2 kW
water pump - 0.5 kW
compressor - 0.42 kW
Connection: 230 V, 50 Hz alternating current
Electric current consumption: 3.12 kW
Electrical protection:
Circuit breaker 16 A
Voltage control: 42 V
Number of revolutions:
pump drive: 80-490 rpm
Performance:: 3-14 l/min, (Depending on the composition of the mortar and type of screw pair) stepless adjustment
Grain size: max 3 mm
Feed distance: 20 m
Max. solution discharge pressure:: 20 bar (Depending on the composition of the solution)
Noise level: 78±1Db
Complete:
- Hose 3/8" air 10 m (with GEKA connections) transparent - 1 pc
- Hose 25 mm 10 m (sleeve) with connections - 1 pc
- Geka gasket - 3 pcs
- Gasket 25 mm connection MT-25 - 2 pcs
- Washing ball 30 for a 25 mm hose - 2 pcs
- Connection GEKA hose 3/4" - 2 pcs
- Cleaner - 1 pc
- Cleaner shaft - 1 pc
- Spiral mixing - 1 pc
- Gun for mortar 0.5 m - 1 pc
- Shompol for cleaning the gun - 1 pc
- Special key for dismantling the water reducer - 1 pc
- Template for a gun nozzle - 1 pc
- Extension cord in rubber insulation 230V 10 m 3x2.5 - 1 pc
- Key for the control cabinet - 1 piece
- Wrench 13-19 mm - 1 pc
- Wrench 24-30 mm - 1 pc
- Screw pair B 4-2 L - 1 pc
- Radiator brush - 1 pc
- Instructions for plaster station MIXXMANN S3