| Type of equipment |
Brinkmann 550, Brinkmann 450 |
|---|---|
| Brand |
No brand |
| View |
Bearing |
40.84 EUR
| Type of equipment |
Brinkmann 550, Brinkmann 450 |
|---|---|
| Brand |
No brand |
| View |
Bearing |
Shaft Bearing for Putzmeister M740/3/4 Brinkmann 450/550 Original (1212ETN9 SKF) — a double-row self-aligning ball bearing designed to support and facilitate the rotation of the mixing shaft in Putzmeister and Brinkmann pneumatic pumps. It is used in the flanged support units of the mixing container for equipment designed for preparing and transporting construction mixtures, particularly for semi-dry floor screed blends.
The SKF 1212 ETN9 bearing features two rows of balls and a common spherical raceway in the outer ring. This design allows for self-compensation of angular misalignments between the shaft and the bearing housing, which can occur due to shaft deflection or installation deviations. This enhances load distribution, reduces friction, and ensures stable operation of the mixing mechanism.
The inner and outer rings are made of bearing steel, while the polymer separator holds the balls in the correct position and ensures their even spacing. The bearing has a cylindrical mounting bore and an open design without contact seals. This configuration requires appropriate lubricant and protection as part of the bearing assembly in the equipment.
The dimensions are 60×110×22 mm: an inner diameter of 60 mm, an outer diameter of 110 mm, and a width of 22 mm. The nominal dynamic load capacity of the bearing is 31.2 kN, while the static load capacity is 12.2 kN. The normal radial internal clearance CN complies with the standard configuration of the SKF 1212 ETN9 model.
This bearing is used during repairs of the front and rear supports of the mixing shaft, for the replacement of worn bearing elements, and for restoring the operation of the mixing drum. The self-aligning design is especially beneficial for assemblies where minor angular deflections of the axis of rotation may occur due to working loads. It is intended for compatible flanged units of Putzmeister M740/3/4 and Brinkmann 450/550 pneumatic pumps.
Type: self-aligning ball bearing.
Manufacturer: SKF.
Model: 1212 ETN9.
Execution: Original.
Purpose: support and facilitate the rotation of the mixing drum shaft.
Compatible Equipment: Putzmeister M740/3, M740/4, Brinkmann 450, Brinkmann 550.
Type of Bearing: radial, double-row, self-aligning.
Number of Ball Rows: 2.
Inner Diameter: 60 mm.
Outer Diameter: 110 mm.
Width: 22 mm.
Overall Dimensions: 60×110×22 mm.
Type of Mounting Bore: cylindrical.
Material of Rings: bearing steel.
Material of Separator: polymer.
Type of Design: open, without seals.
Radial Internal Clearance: normal (CN).
Nominal Dynamic Load Capacity: 31.2 kN.
Nominal Static Load Capacity: 12.2 kN.
Limiting Load for Fatigue Strength: 0.62 kN.
Permissible Angle of Misalignment: up to 2.5°.
Approximate Weight: 0.9 kg.
Feature: compensation for angular misalignments of the shaft relative to the housing.
Installation Location: support flanged units of the mixing drum.
Application: repair and maintenance of mixing mechanisms in Putzmeister and Brinkmann pneumatic pumps.
Search
Your shopping cart is empty!
Gypsum plaster
Plastering stations
Electric motors, gearboxes
Compressor equipment
Spare parts for plastering machines
Plastering guns
Nozzles, jets for decorative plasters
Mixing spiral holders
Mixing spirals
Cleaners
Flooring mixer
Mixing chambers
Pressure flanges
Additional bunker
Grid of the bunker
Wheels
Rubber mixing zone
Water pumps
Needle valves
Water purification filters
EWO connection
Nipples
Brass fittings
Mounting for plastering machines
Locks, bolts
Gaskets, seals
Housing caps
Screws for plastering machines
Hoses for construction equipment
Connection for construction equipment
Control and measurement instruments
Automation for plastering stations
Construction tools
Power tools
Building materials
Workwear
Personal protective equipment (PPE)
Painting equipment
Hoses for construction equipment
Construction tools
Building materials
Personal protective equipment (PPE)
Workwear
Cement plaster
Drive reducer
Spare parts for Putzmeister P13
Piston pump for solution
Bunker shaft
Belts, pulleys
Putzmeister P13 crankshaft
Parts of the piston system
Hopper blade
Valves
Putzmeister P13 cranes
Vibrator details
Spare parts for clutch
Compressor
Electrical equipment
Oil bottle
Bumpers, cushions
Putzmeister P13 bushings
Putzmeister P13 bearings
Sanitary pads
Manometers for Putzmeister P13
Fittings
Metric products
Body spare parts
Components for cement plaster.
Screws for plastering machines
Hoses for construction equipment
Connection for construction equipment
Construction tools
Power tools
Building materials
Workwear
Personal protective equipment (PPE)
Hoses for construction equipment
Machines for screed pouring
Components
Extinguishers
Barrel lid spare parts
Loading funnel
Barrel flange
Flange repair kits
Shovels
Armor
Barrel spare parts
Clutch sleeve
Drive shaft
Belts
Cranes
Hydraulic pumps
Spare parts for pneumatics
Check valve
Connection
Electrical equipment
Central lubrication tools
Manometers for pneumatic injectors
Fuel tanks
Trailer, wheels
Shock absorbers
Body spare parts
Engine spare parts
Crankshaft, distribution shaft
Piston rings, connecting rods
Valves, engine lifters
Insert
Engine bushings
Engine gaskets
Engine cushion
Flywheel crown
Radiator cooling fans
Timing belt repair kit
Pressure and temperature sensors
Starters, generators
High pressure fuel pump
Fuel pump of the engine
Oil pump
Filters
Oil cooling radiator
Hour meter
Exhaust pipe details
Oil level dipstick
Spare parts for screw compressors
Drive reducer spare parts
Hoses for construction equipment
Connection for construction equipment
Power tools
Construction tools
Building materials
Workwear
Personal protective equipment (PPE)
Connection for construction equipment
Construction tools
Power tools
Building materials
Workwear
Personal protective equipment (PPE)
Need help?