Water pump PKm65 230V PFT

SKU: 00000030

118.20 EUR

Specification

Type of equipment	Pedrollo PKm65
Brand	No brand
View	Pump
High-voltage	230V

Description

The Pedrollo PKm 65 vortex pump is designed for pumping clean water that does not contain abrasives and heavy chemical elements.

The Pedrollo PK vortex pump is used to pump clean water, which does not contain abrasive substances and aggressive chemical elements that can damage the material of the pump structure and its mechanism.

The pumps in this series are quite powerful, reliable and easy to use. The units are excellent for agriculture, for the purpose of filling special tanks for watering and irrigating vegetable gardens. In addition, it is possible to use the pump in the municipal sector or to lift water from wells.

Installation of the vortex pump must certainly take place indoors or in any other place protected from atmospheric influences. A high level of efficiency allows you to achieve high pressure with an average level of productivity.

2 year warranty.

Pump housing

The pump is housed in a durable cast iron casing, which is coated with a layer of polymer paint.

This design prevents the appearance of corrosive formations, which greatly extends the service life, protecting against premature failure. Threaded pipe UNI ISO 228-1. Engine cover - aluminum with brass insert.

The impeller with peripheral radial blades is brass. Drive shaft - stainless steel.

Normal operating temperature of conducted water is from -10ºС to +60ºС.

Operational characteristics

Flow up to 90 l/min (5.4 m³/h);

Pressure up to 100 m;

Use restrictions

Gauge suction lift up to 8 m;

Liquid temperature from -10 °C to +60 °C;

Ambient temperature up to +40 °C;

Maximum pressure in the pump housing:

– 6.5 bar in PK 60-65-70-80

– 10 bar in PK 90-100-200-300