Line marking unit LS4900

SKU: 00097419

5 095.37 EUR

Specification

Brand	No brand
View	Unit for marking lines, Electric
Type	Paint sprayers, LS4900
Power	9 hp, 6 hp

Description

Machine for applying road markings LS-LS-4900 – This is a professional competence for the execution of large-scale operations for marking various purposes.

Ideal for applying road markings, and also for:

roads;
pedestrian crossings;
parking lots;
warehouse areas;
sports squares;
Zlitno-landing Smuha airport Toscho.

Hydropiston machine for road marking LS – 4900 is best suited for continuous and important work such as road markings, vikoristan paints with varying degrees of thickness.

The hydraulic piston pump of the unit is driven by a hydraulic system, which is also driven by a gasoline engine. The hydraulic piston system allows you to operate more efficiently than classic piston marking devices.

Advantages of a hydraulic piston unit over pistons:

Number of electronic components (control, display board, pressure sensor, etc.)
Increased productivity allows you to “open the torch” When working with farbs, there is high viscosity, more clearly and evenly, without thickening around the edges of the torch, which happens on piston devices due to lack of pressure.
Working in viscous warehouses is carried out at lower speeds, lower than piston speeds, which allows increasing the working life of the unit.
To reduce vibration, the engine is mounted on vibration mounts. The front swivel wheel is equipped with a straight line locking system for easy drawing of straight lines.
Belt drive
The oil pump works continuously during the entire pumping process, replacing the piston pump pump that is driven by it (which works only at the moment when the trigger of the saw is pressed), when the temperature is high, which is unpleasant Available on your resource.< /li>

Characteristics:

Engine power: 9.0 hp

Power:Honda gasoline engine

Pump type:hydraulic piston pump

Maximum flow: 7.0 l/hv 2 guns

Maximum nozzle size (inches): 0.043 (hydraulic pump)

Sawing width: 50-500 mm

Spreading speed: 188 m/hw

Maximum working vice: 30 MPa